HOME > 제품정보 > 콘트롤러
- Speed Controller with Tacho generator
- Digital Type
PI Automatic Control by MICOM
- Rpm display
- Protect against over current
- One-touch connection by 8 pin housing connector
(extension cord 1.5[m] long max, optional)
 
▶ Cut a hole in the mounting plate as indicated in
the diagram to the left.

▶ Insert the control unit from the front of the mounting
plate and fasten with screws and nuts.

Mounting screw(M4*10) -------- 2
Nuts ------------------------ 2
Washers --------------------- 2
Model
Item
MSD-V□□□
1
Input voltage
1 Ph. 100V
1 Ph. 200V
1 Ph. 115V
1 Ph. 220V
1 Ph. 220V~240V
2
Input voltage Threshold
± 10%
3
Input Frequency
60 Hz
50 Hz
4
Speed Range
90~1700 rpm
90~1400 rpm
5
Permissible Current
MAX. 5A
6
Motor output
6W ~ 180 W
7
Control method
TRIAC AC PHASE CONTROL
8
Speed Control method
PI Automatic Control by MICOM
9
Sensor Type
AC Tacho Generator(T.G)
10
Speed set method
Volume type
11
Power switch
Toggle switch
12
Run switch
Tack switch(RUN/STOP)
13
Display
7 SEGMENT
Stand by status : setting rpm display
7 SEGMENT
Run status : measurement rpm display
Green LED
Run : light, Stop : off
RED LED
Over current : light , staedy status : off
14
Weight
About 274g
15
Operating Temp.
-5℃ ~ +40℃
16
Operating Humidity
Max 85% (No condensation)
17
Over Current protection
Protect against over current
18
FUSE
Inside control unit
19
Insulation Resistance
100MΩ or more when 500VDC is applied between the windings and the frame
20
Dielectric Strength
Sufficient to withstand 1.5kV at 50/60Hz applied
between the windings and the frame for 1 minute
21
EMC
Please contact us
* Extension cord(optional) is conveniently used
when motor is located more than 300[mm] apart from control unit

* Standard length is 0.5[m] (option : max 1[m])