HOME > 제품정보 > 콘트롤러
- Speed Controller with Tacho generator
- Analog Type
- Built-in speed setting
- One-touch connection by 8 pin housing connector
(extension cord 1.5[m] long max, optional)


 
▶ Cut a hole in the mounting plate as indicated in
the diagram to the left.

▶ Insert the control unit from the front of the mounting
plate and fasten with screws and nuts.

Mounting screw(M4*10) -------- 2
Nuts ------------------------ 2
Washers --------------------- 2
Model
Item
MSA-V□□□
1
Input voltage
1 Ph. 100V
1 Ph. 200V
1 Ph. 115V
1 Ph. 220V
1 Ph. 220V~240V
2
Input voltage Threshold
± 10%
3
Input Frequency
60 Hz
50 Hz
4
Speed Range
90~1700 rpm
90~1400 rpm
5
Permissible Current
MAX. 5A
6
Motor output
6W ~ 180 W
7
Control method
TRIAC AC PHASE CONTROL
8
Sensor Type
AC Tacho Generator(T.G)
9
Speed set method
Volume type
10
Run switch
Toggle switch
11
Display
RED LED
Input Power ON : light, Input Power OFF : off
12
Weight
About 170g(Except for Internal Capacitor)
13
Operating Temp.
-5℃ ~ +40℃
14
Operating Humidity
Max 85% (No condensation)
15
FUSE
Inside control unit
16
Insulation Resistance
100MΩ or more when 500VDC is applied between the windings and the frame
17
Dielectric Strength
Sufficient to withstand 1.5kV at 50/60Hz applied
between the windings and the frame for 1 minute
18
EMC
Please contact us